Introduction
Detailed instructions for the Beatbox Blackbird are coming soon. In the meantime, refer to the video below for specific installation steps.
- If you have a 2023 year or later Sprinter chassis, you must also install the bus bar expansion kit. Instructions here.
- If you have a 2025 Revel, follow this guide to prepare the passenger seat base for installation.
To prepare your van for installation, many of the steps for the Beatbox Blackbird are the same as for the previous version, the 10" Beatbox. Refer to the 10" Beatbox guide for steps on how to disconnect the chassis battery, remove the seats, remove the floor, remove the wire chase cover and access other necessary areas.
In the video, sections are:
00:09 Removing the Door Panel
06:53 Preparing the Boot
08:40 Loosening the Driver Seat
09:59 Removing the Wire Tray
12:14 Trimming the Wire Tray
13:10 Preparing the Speakers
14:32 Installing the Door Speakers
16:15 Removing the EK1
16:44 Under the Driver’s Seat
17:37 Running Door Wires
22:24 Installing the Tweeters
26:27 Reinstalling Door Panels
29:25 Installing Subwoofer Knob
31:44 Wire Routing
33:55 Subwoofer Installation
38:10 Power Wires
Video Instructions
Beatbox Blackbird Installation
Beatbox Blackbird Installation
Video Source
0 Comments